S38 B35 Trouble Shooting kit

S38Mike · Post by **S38Mike** » Oct 16, 2011 1:33 PM

Lmao. Winfred, the description of your car is hilarious!

winfred · Post by **winfred** » Oct 16, 2011 1:49 PM

i think if i tried to drive it twood break in half

S38Mike wrote:Lmao. Winfred, the description of your car is hilarious!

Kyle in NO · Post by **Kyle in NO** » Oct 16, 2011 2:17 PM

Yeah, Winfred's M635 looks like a mock-up of a real car made out of rust flakes...or any E12 M535i shown here recently.

1st 5er · Post by **1st 5er** » Oct 16, 2011 4:32 PM

http://www.mye28.com/viewtopic.php?p=889224#889224

Philo · Post by **Philo** » Oct 17, 2011 4:07 PM

Thanks for the offers guys.. No need to buy a new ECU yet.. still waiting for a member to respond regarding the ECU. I'm hoping it was simply a mix up. Will wait and see. If in the end I don't get the ECU back I hope someone can donate an old one to the kit. Or maybe share the cost of sending the POS one I got back to Programma to have it tested and rebuilt.

1stm5nut · Post by **1stm5nut** » Oct 22, 2011 9:06 PM

any progress?

Philo · Post by **Philo** » Oct 23, 2011 4:33 PM

ECU found and is on its way back to Cali

Was an honest mistake. We are all good. I need to do some cleanup on the kit before I send it out again. Also need to find a different shipping box.., the one I have keeps coming back partially open, which is weird.., I think UPS might be inspecting the box because it keeps getting shipped all over the US. Post 911 is a bitch.

AT8M5 · Post by **AT8M5** » Oct 23, 2011 5:01 PM

That's great to hear!

Karl

Post by **mooseheadm5** » Oct 23, 2011 5:13 PM

Great news! You should take the following steps, though. Each kit recipient needs to let you know their name, address, and phone number. You should mark all pieces of the kit with a paint pen and install a warranty control tag on the ECU to keep someone from opening it. That way you always get your same parts back and instantly know when something accidentally gets switched. Each kit recipient needs to verify when they get the kit that they have all the parts with your marking on them.

1stm5nut · Post by **1stm5nut** » Oct 23, 2011 11:39 PM

awesome!

wkohler · Post by **wkohler** » Oct 23, 2011 11:48 PM

Great news. I agree with Moosehead. The known-good parts need to stay known-good!

1st 5er · Post by **1st 5er** » Oct 24, 2011 2:20 PM

Another happy ending to yet another MyE28.com drama. I love happy endings.

ahab · Post by **ahab** » Oct 26, 2011 12:04 PM

This is great news! Especially since I may need it soon

. Glad to hear it worked out Phil.

1stm5nut · Post by **1stm5nut** » Nov 05, 2011 10:58 PM

hey philo,
i just wanted to touch base. when the kit becomes available i would greatly appreciate using it. my girl has been stone cold since this whole thing started.
best regards
damion

Bennetts22 · Post by **Bennetts22** » Nov 11, 2011 11:27 AM

Glad to hear it worked out

I have the adapter for the leak down

Wolf1971 · Post by **Wolf1971** » Dec 16, 2011 3:09 AM

Philo:

I'm in dire need of your S38 box o' magic . Did you figure out how to handle the deposit issue so there aren't any issues in the future? Rich suggested I give you a shout.

Thanks,
Randall

tn535i · Post by **tn535i** » Aug 20, 2012 7:34 PM

I too have always felt pretty good about the insurance policy and peace of mind for this and other resources on this board if I ever needed to ask. Was reading this and also mad but glad it worked out.

But in another direction I will look around and see if we have any unused reusable (small suitcase sized) plastic shipping containers I could donate. Would be happy to ship it out to you if I find one the right size. In liu of that you might be surprised how well a 5 gallon bucket works for stuff like this. I know I have one of those (screw on locking lid) around and those are not hard to find. We ship all kinds of stuff in and out in those things and they are nearly indestructible, and come with a handy carry handle.

L_N_Love · Post by **L_N_Love** » Oct 21, 2012 9:42 PM

Is this kit still available?

Philo · Post by **Philo** » Oct 22, 2012 1:13 PM

The kit is in my garage and really haven't been motivated to make it available because the last few times the kit came back in pieces due to poor packing and taping of the box. I'm not sure if it was board members not paying attention or the shipping company thinking the contents were WMDs and opened the box to investigate. On one occasion the UPS delivery guy walked into my office to deliver the box and the kit top was open, no tape, pieces rolling around inside, etc.. The distributor cap and rotor got broken, injectors were rolling around, AFM cover was off.., it wasn't pretty. On one other return the ECU had been replaced with an older rebuilt unit. I did speak with that board member and it was an honest mistake.

Bottom line is it's sitting in my garage. I need to find a better box and better shipping foam to isolate the parts during shipping. And find replacements for the dist cap and rotor. Doesn't make any sense to ship broken parts.

wkohler · Post by **wkohler** » Oct 22, 2012 1:16 PM

What might be a nice idea is to perhaps get a Pelican case or similar with cutouts in the foam for these items. Really, things like the ECU are certainly worth protecting and not everyone is well-versed in packing. It might certainly cost more to ship but I believe the important thing is to ensure the known-good components stay "known-good."

Philo · Post by **Philo** » Oct 22, 2012 1:24 PM

I'm looking into it.., thanks. The box I was using was a laptop shipping box that had a flip-top and internal packing. I then adding foam with parts cutouts. Will look into a Pelican case.

Philo · Post by **Philo** » Oct 22, 2012 8:14 PM

OK.., get ready for the S38 TS Kit 2.0 Thanks for the tip Kohler. As mentioned we'll need a new distributor and rotor.

http://www.pelicancases.com/1600-p/1600.htm

I need to get a new waiting list going so if anyone needs to use the TS Kit please post.

Da_Hose · Post by **Da_Hose** » Dec 14, 2012 1:16 PM

I would like to add that this is a seriously, crazy awesome forum. At first I could not believe that someone would be willing to have a kit like this to lend out in the first place. It really does boggle the mind.

I would suggest an aluminum case like the one below.

http://www.harborfreight.com/18-x-13-x- ... 69315.html

When you buy it, it comes inside a carboard box. You could pack it, lock it with cotters or wire and ship it inside the original cardboard box. Much more affordable than a Pelican and will offer good protection.

Jose

Philo · Post by **Philo** » Dec 14, 2012 1:38 PM

The kit will be back online in Jan, FYI... I purchased a Pelican case and just need to load everything up.

Does anyone know if I ship the pelican case as-is or should I put the case in a box and then ship ?

Da_Hose · Post by **Da_Hose** » Dec 14, 2012 1:51 PM

Pelican's are lockable and really tough. You can certainly lock them and ship exposed if you like. I would find a box and keep it pretty.

Jose

Philo · Post by **Philo** » Jan 21, 2013 9:19 PM

OK.., this is who I have on the waiting list. If anyone else needs the kit please post to this thread. PM and emails are cool also but also post here so I have a running list.

Lastly.., if you are a new member to the board you'll need an established member to vouch for you

Ahab
1stm5nut
Wolf1971
L_N_Love

ahab · Post by **ahab** » Jan 21, 2013 9:35 PM

I be ready bro. 1st 5er may want to jump in front of me since he sounds like he's got the need today based on his thread. I can get if from him. If Sherman is out let me know what to do to get it shipped my way.

1st 5er · Post by **1st 5er** » Jan 21, 2013 11:05 PM

Yes, the immediate need is there, but I will wait in line if necessary.

Philo · Post by **Philo** » Jan 22, 2013 1:23 PM

EDIT I mixed up 1st 5er and 1stM5Nut. Below is the new list order. I added a "standby" list for those that might need the TS kit but not right away. So we skip them until they are ready however their place in line remains.

1st 5er
Ahab - Standby
1stm5nut
Wolf1971
L_N_Love

On standby
Ahab

I have a coupe things to do with the padding in the case so will post when 100% ready. Not long though. Everyone, please email your contact and address info to phil@infostreet.com.

1st 5er · Post by **1st 5er** » Jan 22, 2013 4:56 PM

Somebody can PM me for an address.

Philo, this is a great thing you are doing.

MyE28.com DEV

MyE28.com DEV

S38 B35 Trouble Shooting kit