The M10 sensation: Euro 518i

Post your photos and videos here!
Justin_FL
MyE28 IT Guru
MyE28 IT Guru
Posts: 2832
Joined: Feb 12, 2006 12:00 PM
Location: Palm Beach
Contact:

The M10 sensation: Euro 518i

Post by Justin_FL »

Hey guys, thought some might get a kick out of seeing this thing. I just got the car a few days ago. Some may recognize it. Drove an hour to look at the car over the holiday weekend and was impressed with the fairly original condition and uniqueness.

Loaded and ready for the trip home:
Image

From what I can tell, it was sold by a Munich dealership to be exported to Central America where it probably lived in El Salvador from 1986-1992 or so before being imported to the US. This is based on my examination of the original service booklet and the shop stamps. Based on an old insurance card with a unique name, I'm guessing it remained with the original owner until about 2005 in the Atlanta metropolis. Another person owned it for a number of years in the metro area and sold the car last year.

The 518i is very basic and has quite a few differences when compared to the higher-spec and larger engined E28 models. I will try to document those differences during the course of repairs. For a 518i, mine has the unusual option of factory A/C. A 1985 ordering catalog I have from BMW the shows that green insulating glass (like a US car) was recommended in conjunction with A/C to improve the cooling performance and this car was so equipped. Other options are central locking, power mirrors, power steering (although this might have been standard), and a factory installed radio with power antenna.

Despite the cars current mechanical needs it appears to have been taken care of over the years. I have found rather new Euro headlamps & grilles, tail lamps, AFM, all ignition components, radiator & hoses, and catalytic convertor. It probably had to pass Georgia Clean Air emissions up until 2011 so it had to run well. Right now I have to look forward to a clutch job, brakes, shocks & struts, shifter bushings, LCAs, and rehabbing the driver's seat structure to make it a safe and comfortable E28. I would also like to obtain a more correct size tire for the 5.5" steel wheels. The 185/65s on there now are a bit short; a 185/75-14 would be a more appropriate substitute for the original 175R14s.

As far as my plans for the car, I would like to keep it original as much as possible. It has survived this long without molestation. Obviously I will be myself and go through the car, cleaning and detailing along the way while fixing things. While not detailed it is very clean throughout, including the undercarriage as would seem indicative of a lower mileage car.

I have not driven the car much to get a good feel for it, but my impression is that it is not as slow as one would think. The M10 runs a bit higher compression than the ones sold here and with such a lightweight body, it still beats the diesels. The owners manual shows a base 518i, ready for the road with a full tank of gas, as weighing 2560lbs. I don't know the weight of the A/C system, but I'm curious and have some corner balance scales.

Anyway, it will probably be a while until I get around to working on the car and sorting it out. Just for grins, I decided to clean up a section under the hood. Single stage tends to stain as it is more porous, but I'm happy to see it cleans up fairly easy with some elbow grease and a non-abrasive product. Here was a couple minutes of work on the front corner of the fender and hood latch support:

Image Image

The rest of the original paint should come out well. Unfortunately the driver's side doors, rear quarter, and trunk lid were repainted and the color match is off. All panels including doors appear original and show no evidence of filler, so it was likely more innocuous reasons for the paint work. The color difference is a bit less noticeable in person depending on the light. Something to address eventually.

Here are some pictures of the interior from the seller's ad since I haven't taken any:

Image Image Image Image
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Post by T_C_D »

Awesome Justin. That car needs boost!
Das_Prachtstrasse
Posts: 5616
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

Post by Das_Prachtstrasse »

I'd leave that thing stock as a rock and the daily the shit out of it. Awesome.
ldsbeaker
Posts: 6131
Joined: Mar 25, 2007 10:14 PM
Location: Slicktop City, AZ
Contact:

Post by ldsbeaker »

My car's little brother!

Slicktops unite!!
Karl Grau
Posts: 9717
Joined: Mar 10, 2006 7:34 PM
Location: Sandy Eggo

Post by Karl Grau »

Das_Prachtstraße wrote:I'd leave that thing stock as a rock and the daily the shit out of it. Awesome.
Same here. There is something beautiful about the simple and utilitarian nature of that car. Nice find!
oldskool
Posts: 12001
Joined: Jul 13, 2008 3:46 PM
Location: coastal north carolina
Contact:

Post by oldskool »

Mother of God . . .
Coldswede
Posts: 6859
Joined: Oct 10, 2008 1:48 PM
Location: Back U.P. North,. Where the water's blue, the wind is free and seasons four.

Post by Coldswede »

That is great Justin, bring it to this months Bakery Run!
Kyle in NO
Posts: 17638
Joined: Feb 12, 2006 12:00 PM
Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA

Post by Kyle in NO »

I'm stoked you picked this car up Justin. Hoping some assbag wouldn't buy it to completely ruin!
Justin_FL
MyE28 IT Guru
MyE28 IT Guru
Posts: 2832
Joined: Feb 12, 2006 12:00 PM
Location: Palm Beach
Contact:

Post by Justin_FL »

T_C_D wrote:Awesome Justin. That car needs boost!
I think that would be fun, but don't know this car well enough yet.

I still grin thinking about the ride in your S1 535i, Todd. Hard to believe it was 9 years ago! My '88 535is is the perfect candidate. Would like to actually own a quick vehicle for once...
B7Turbo
Posts: 1260
Joined: Feb 12, 2006 12:00 PM
Location: Toronto, Ontario

Post by B7Turbo »

Cool car Justin, lots of potential. What are your plans?
It is interesting that lately two other members (Adam and Graham) have end up with couple of nice condition lower powered euro e28s as well.
Justin_FL
MyE28 IT Guru
MyE28 IT Guru
Posts: 2832
Joined: Feb 12, 2006 12:00 PM
Location: Palm Beach
Contact:

Post by Justin_FL »

Coldswede wrote:That is great Justin, bring it to this months Bakery Run!
Gosh, do you guys plan these in secret? LOL. I probably won't be up for the trip this go around, 200 miles each way is still a drive.

I couldn't take the 518i, it just isn't safe right now until repairs are made to the suspension and brakes.
Sam 84, 533i
Posts: 776
Joined: Nov 26, 2010 7:23 PM
Location: Seattle Washington

Post by Sam 84, 533i »

That interior... :shock:
Justin_FL
MyE28 IT Guru
MyE28 IT Guru
Posts: 2832
Joined: Feb 12, 2006 12:00 PM
Location: Palm Beach
Contact:

Post by Justin_FL »

B7Turbo wrote:Cool car Justin, lots of potential. What are your plans?
It is interesting that lately two other members (Adam and Graham) have end up with couple of nice condition lower powered euro e28s as well.
Sia, I have no plans, really. Base-lining the car and making it a mechanically solid driver would be a good starting point! Probably use it here and there as a daily driver when the weather isn't super wet and rainy.

It does need a nutria dashboard, since it is cracked. Very difficult to find, so I might have to switch out for a black dash and door caps.
Slow_Ballin'
Posts: 1425
Joined: Nov 15, 2010 12:37 AM
Location: Sacramento

Post by Slow_Ballin' »

Very cool and appears to be in wonderful shape!
Eta power
Posts: 1413
Joined: Mar 25, 2010 10:33 PM
Location: Vancouver, WA

Post by Eta power »

Sunning car, looks like a lot of fun. That interior... Image
grahamular
Posts: 1717
Joined: Feb 12, 2006 12:00 PM
Location: Baltimore, Maryland

Post by grahamular »

Very cool that you plan to leave it mostly original, so glad you decided to pick that one up!

-Graham
Bulletproof 5
Posts: 82
Joined: Dec 14, 2012 9:00 AM
Location: South

Post by Bulletproof 5 »

Nice find I would leave it stock, thats a nice example of euro.
Congrats.
symmat001
Posts: 93
Joined: Jun 27, 2012 10:37 AM
Location: Cape Town, South Africa
Contact:

Post by symmat001 »

I wonder how easy an m42 swop would be, mounting points etc?
leadphut
Posts: 4499
Joined: Feb 12, 2006 12:00 PM
Location: Portland, OR

Post by leadphut »

Congratulations. Looks like a great find!
Mark in Toronto
Posts: 2442
Joined: Feb 14, 2008 7:28 PM
Location: Toronto

Post by Mark in Toronto »

Justin, very nice, the perfect fair weather daily driver.

Any idea of the final drive ratio?
Coldswede
Posts: 6859
Joined: Oct 10, 2008 1:48 PM
Location: Back U.P. North,. Where the water's blue, the wind is free and seasons four.

Post by Coldswede »

Justin_FL wrote:
Coldswede wrote:That is great Justin, bring it to this months Bakery Run!
Gosh, do you guys plan these in secret? LOL. I probably won't be up for the trip this go around, 200 miles each way is still a drive.

I couldn't take the 518i, it just isn't safe right now until repairs are made to the suspension and brakes.
Sorry Justin, I do not have your e-mail address to copy you the Bakery run planning questions. I just sent the email out anyway, so not much secrecy there. There will be a thread in General when we decide if/when most of us can make it.
Shawn D.
Beamter
Beamter
Posts: 22094
Joined: Feb 12, 2006 12:00 PM
Location: Alpharetta, GA
Contact:

Post by Shawn D. »

That is a neat find!
Justin_FL
MyE28 IT Guru
MyE28 IT Guru
Posts: 2832
Joined: Feb 12, 2006 12:00 PM
Location: Palm Beach
Contact:

Post by Justin_FL »

symmat001 wrote:I wonder how easy an m42 swop would be, mounting points etc?
That could be fun but not sure about motor mounts and oil pan. Many M10 items appear specific to the E28. Probably less work to turbo the engine in the car if I need more HP.
Coldswede wrote:Sorry Justin, I do not have your e-mail address to copy you the Bakery run planning questions. I just sent the email out anyway, so not much secrecy there. There will be a thread in General when we decide if/when most of us can make it.
Hey Randy, I was just joking. You probably have my address but don't realize it from the emails Tim sends out. We should use a Yahoo group or something to manage an email list. I did set one up a couple years ago but that was when Randy C. was still involved in the pep rally duties so I never pushed for its use. This way you just send a single email to one address and the distribution goes out to everyone and you don't have to worry about keeping your address book up to date and people can come and go as they please. I could also run something on our server here and let other groups use it if they see fit (with their own dedicated email list, of course). Most of the free services will have ads and what not.
Mark in Toronto wrote:Any idea of the final drive ratio?
I believe it is a 4.10.
S14
Posts: 517
Joined: Oct 18, 2009 7:38 AM

Post by S14 »

Very cool car! In Taxi car beige too!
Eddie in TO
Posts: 1007
Joined: Feb 12, 2006 12:00 PM
Location: Toronto, Ontario, Canada
Contact:

Post by Eddie in TO »

Congratulations Justin! :banana:
That's one sweet ride!
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Post by T_C_D »

Justin_FL wrote:
T_C_D wrote:Awesome Justin. That car needs boost!
I think that would be fun, but don't know this car well enough yet.

I still grin thinking about the ride in your S1 535i, Todd. Hard to believe it was 9 years ago! My '88 535is is the perfect candidate. Would like to actually own a quick vehicle for once...
Time flies! I have a nice tubular m10 manifold that I have been saving for such a project. 15psi and MS on that car would make it really fun, allow you to install a 373LSD and possibly achieve 30mpg and 220hp. That would be very cool.

It would be faster than a stock e28 M5.
Tablasaurus
Posts: 127
Joined: Dec 16, 2011 7:19 PM
Location: Seminole FL

Post by Tablasaurus »

Congratulations! I live in FL and saw this car online and I couldn't believe it lol. Had I not already had my 535i I probably would've tried for that car.
Crazy_Canuck
Posts: 313
Joined: Feb 12, 2006 12:00 PM
Location: Surrey

Post by Crazy_Canuck »

Justin_FL wrote: I couldn't take the 518i, it just isn't safe right now until repairs are made to the suspension and brakes.
Does your 518i have the rear drum brakes?
How about a rear sway bar? Mine does not even have mounting points for the sway bar on the trailing arms.

Does it have the 4.27 differential in it? How about the CV joint connecting the driveshaft to the differential?
m-racer
Posts: 5274
Joined: Feb 12, 2006 12:00 PM
Location: Tampa Bay Florida

Post by m-racer »

Interesting car Justin, Congrats. I do have a stage 3 M10 (with a worked head, 2.3 crank, a 305 Alpina cam and twin 45 side drafts) in storage. It makes about 170 hp, so pep is possible with an M10.
shagrath
Posts: 14980
Joined: Jun 15, 2009 12:21 PM
Location: pLace

Post by shagrath »

I am in love!!!

Hope that car cover comes in handy for this!
Post Reply