I need these settings/info for MS1 please.

Discussion pertaining to positive pressure E28s.
Post Reply
DangerWillRbnsn
Posts: 442
Joined: Sep 29, 2011 7:33 PM
Location: Las Vegas, NV

I need these settings/info for MS1 please.

Post by DangerWillRbnsn »

Hey guys,

I'm getting REALLY close with this MS. I have the car in the shop now, and I'm trying to avoid a 15 hour labor charge if the tech has to figure it all out himself. If anyone out there has the settings for cranking, I would be most appreciative if you would share with me so I can get the car running.

1. The third tab (cycle after power changes. Should I have it set to "Generic Wheel"?

The rest of the tabs, I need pretty much everything. I get NO cranking pulses showing up when I crank the car. I'm sure I have the wrong data for cranking settings.

I am almost completely wiring illiterate, so if you can spell it out for me that would be amazing. I took a screenshot of the info I need.

Image

Those three open tabs... I need to know all.

Please feel free to call or text if you prefer! 702-371-9301. Thanks for your help fellas!

Shane
Shadow
Posts: 951
Joined: Dec 28, 2008 10:03 PM
Location: USA

Post by Shadow »

Here is my old ms1 settings.
If you upgrade to ms2 u can do cooler things btw.


https://docs.google.com/file/d/0BzS8yr8 ... sp=sharing


*this site should have attachments. I almost didn't take the
time to post :(
DangerWillRbnsn
Posts: 442
Joined: Sep 29, 2011 7:33 PM
Location: Las Vegas, NV

Post by DangerWillRbnsn »

Shadow wrote:Here is my old ms1 settings.
If you upgrade to ms2 u can do cooler things btw.


https://docs.google.com/file/d/0BzS8yr8 ... sp=sharing


*this site should have attachments. I almost didn't take the
time to post :(
Thank you, Shadow! I'm glad you did... you've probly saved me a labor fee in the $1300 range with just the single post. I'll see if I can find what I need in your link.

MS2 is just a $100 chip... I might end up doing that.
9mil
Posts: 268
Joined: Sep 27, 2010 8:43 PM
Location: Atlanta, Ga

Post by 9mil »

Very timely post for me too! Thanks shadow-
DangerWillRbnsn
Posts: 442
Joined: Sep 29, 2011 7:33 PM
Location: Las Vegas, NV

Post by DangerWillRbnsn »

Got it running today on MS1. I still need to iron out a lot of details, but it starts right up!

I have to figure out TPS wiring (I have no signal for TPS).

I have to do the IAC wiring.

I have to wire in the GM IAT and get rid of the AFM.

But I am excited! When this is all ironed out, I'll only be about 30 days from FINALLY throwing the turbo kit on. Woot!

Thanks again Mye28 (and shadow for the details here).
Post Reply