I'm considering injectors at this point in my m30 turbo build. It's going to be running 20lbs of boost steady. I will be running megasquirt and don't want to sacrifice idle as is common with large lb injectors. Do the injectors in the link look good or is there something better? Don't want to spend more than say $60/injector.
I run 16psi on 42lbers without issue on my m30. 60's should feed well in excess of 5-550 hp with safe duty cycle (which I admittedly care not about) I thought?
Edit: did I miss something regarding fuel? is this e85?
the amount of boost you are running makes no difference on injector size... you need to figure out how much power you are trying to make and on what fuel. what size is your turbo and how much does it or can it flow at 20lbs?
sideways7 wrote:the amount of boost you are running makes no difference on injector size... you need to figure out how much power you are trying to make and on what fuel. what size is your turbo and how much does it or can it flow at 20lbs?
so, simply... how much power are you trying to make and on which fuel. that will give you a ballpark. technically you need to know fuel pump flow, fuel pressure goal and some other things also... but start with the basics
Looking for 450-500 hp range. Highest octane available to me is 91. Undecided between hx55 and gt35r. I'm really open to opinions and suggestions at this point. I planned to run twin walbro pumps as well as bigger fuel lines if need be.
