Improved Clutch Over-Center spring - Rev. 2 SOLD OUT

[BenGerman]

Still have plenty available.

[JHCE24]

Ben,
I signed up on 2 NOV 2019 for one copy.
Please let me repeat my desire to get one.

I have a variety of payment options at my disposal.

Please e-mail me at: "jhclark@bowie-cass.com" for sale completion. Or try (903) 202-5137 (Central Time) - no answering machine but usually at home. Beat is e-mail. I look forward to hearing from you. For a1987 E24.

Jim Clark

[BenGerman]

Still have a few left, if anyone is interested.

As a heads up, we've been noticing an issue with some E34 models using a weaker spring rate assembly from BMW, the 35311151990 PN.
The spring rate we are using in our assembly replicates the 35311152540 spring.

Depending on your clutch, this might lead to the clutch pedal sticking to the floor from time to time.
If you notice that the spring assembly that is currently in your car (or on your floor) uses the smaller of the two springs, you can switch the original spring into the new assembly.

Just make sure you use loctite on the bottom Allen head screw and use the correct preset length from the assembly instructions.

The difference can be seen in this picture:

[Jasco1]

Ben, I’ll take one. I just sent you a PM.
Thanks, Jason

[BenGerman]

I have a total of 8 springs left. This is the final 8, I will not be making another batch.

If anybody is interested, just shoot me a PM.

[Ibmotoren]

Hi Ben,
I’ve sent a couple PM’s over the last few months, trying to purchase one. Please let me know if you still have one available. Thank you- Mike.

[mtrspt5]

Ben,

I’ve sent you a PM also. Would like to purchase. Let me know.

Thanks

[willyv124]

I've sent you a pm as well

[thrty8street]

PM'ed as well.

[BenGerman]

All replied to! and SOLD OUT!

[1st 5er]

All replied to! and SOLD OUT!

[rcurtin]

Well crap, am I too late by, like, two days then? Let me know if you either find one sitting around or are thinking of making another run of them because I would happily line up to give you some $$ for it.

(update: thanks 1st 5er for parting with one from your collection! )

[wholepailofwater]

Should've Would've Could've, but I didn't. And of coarse now I need two, one for my e28 and one for my e30....

Hopefully there will be another run?


JP

[BenGerman]

Unfortunately this is one of the things I won’t be able to do anymore. I could potentially have these made at a minimum batch size of 50 but someone else would have to take care of distribution and making sure they all sell.

If anybody is interested in that, feel free to reach out.

Sorry guys!

[BenGerman]

https://www.mye28.com/viewtopic.php?f=4&t=157436

There is a spring for sale here.

[az533]

I'm using one I bought from the original batch, 6 years ago, in my manual swap on this car: https://bringatrailer.com/listing/1988-bmw-735i-14/

It took me just 3 hours to find it!