FS: Parts collection

[alpinass]

Hey Folks!
Clearing out some inventory - take a look, if interested can send pics on request.

BBS front urethane front spoiler - VG Condition
ALPINA front spoiler (early & late) in Black Gelcoat.
Hartge full body kit - front spoiler, 2 side skirts, rear valance finished in fiberglass - excellent quality and strong.
Big Brake kit - 750il FRONT, 540I/M5 rear (vented) calipers, DFC Heat treated vented rotors, DFC EURO ceramic bake pads, F&R brake sensors.
e36 ///M brake calipers rebuilt (Gold zinc), heat treated vented rotors, DFC Euro ceramic brake pads, F&R brake sensors. These are a direct 'bolt on - HUGE Brakes.
Rebuilt CV axles - gold zinc hex bolts & clips.
Front subframe - cold stripped, steering box re-enforcement, powder coated.
Recovered Dashboard - German vinyl - French triple stitch.
Euro M5 ZF Close ratio steering box - RED tag 185Km. tight, no leaks.
US steering box removed from a '87 535i with 145k miles.
New in tank fuel pump sending unit.
HD rear differential mounts - solid unit and M535i/M5
NIB trailing arm bushings (Febi)
NIB Lemforder rear sway bar bushings
NIB Lemforder rear subframe bushings
NIB Bilstein B8 rear shocks (6 settings)
Style 32's Staggered - 17x8 et20, 17x9 et26 ALPINA look with CNC machined centers, ALPINA center caps.
Style 5's - 17x8 et20 refinished, polished lips, silver centers, bright zinc nuts&bolts.
BBS RS 3-piece alloys - RS005/RS006 16x7 et11, 16x8 et24 Refinished
BBS RS 3-piece RS021 16x8 et11 (Deep dish) being completely refinished. Correct silver/clear coated, new hardware & emblems.
BBS RZ412 17x8.5 ET13 refinished - Beautiful
M30B34 low miles - complete STRONG
M30B35 110K miles from a '89 635csi (plug & play) Complete AFM, #179 ECU - ready to install - excellent upgrade.
Getrag 260/6 140K 5-speed conversion for a M30B34 with B&D sensors, shifter, pedals, driveshaft, misc.
Getrag 260/6 from a M30B35 e34/e32 - inspected 5th gear ring gear replaced, new front, rear and shifter shaft seals.
NIB Stainless Steel Headers with down pipes, gaskets.
Euro Chrome bumpers, brackets, rubber strips, mounting hardware, license plate frame.
Euro Sheet metal front valance
Euro turn signals, Fog lights
Rebuilt M30B35 - Hot tanked, inspected, Painted Block with new freeze plugs polished crankshaft, STD size main bearings, rods reworked with new bearings, new piston ring set. 3 angle valve job with new seals, polished valves, New injectors, Custom wiring harness for e28/e24 #179 ECU.
Scheel Mann sport seats with rails.
Glass moonroof from SAAB 9000 sliding cover, cables & all hardware.
e12 dashboard - VGC
B&B Tri-flow exhaust system - almost new low miles.
Many BMW alloys Style 9's, Style 8's.
NEW e28 & e30 front Windshields Green on green excellent fit
M30B35 Cylinder heads
Getrag 265/5 (DOGLEG) sport gearbox - Rebuilt with new seals. Tested Good.
Drip rails, bright trim
e12 Euro bumper set
US to Euro conversion brackets - laser cut

MANY OTHER ITEMS available please inquire.
text 8183771060 or email: laclean@yahoo.com

Thank YOU!

[bubbajan21]

Where are you located?

[mblsixer]

I would be interested in the big brake kit.

[mblsixer]

I have a e24 so I’m not sure on the dash or the bumper conversion plates. Also interested in the transmission. Thank you.

[mblsixer]

I am in Goodyear a western suburb of Phoenix 85385 but i could make a drive and pickup. Thx Brendan.

[LarryM]

Nice assortment of parts! I believe those 16 X 8 ET11 BBS RSs currently being restored would be RS211, not RS021 as described. Probably a typo.

FWIW, about 10 years ago I bought a 3.64 LSD from alpinass and it’s proven to be trouble-free. Trusted seller IMO.

[Spen]

Paul is a stand up guy. I'd always do business with him. Plus he always has rare stuff often refinished to like new or better.

Spence

[U2me2]

How much for dashboard for e28. Thanks

[beast02er]

@alpinass , what of these parts are still available? Anything?