What clutch are you using?

Discussion pertaining to positive pressure E28s.
Post Reply
Shadow
Posts: 951
Joined: Dec 28, 2008 10:03 PM
Location: USA

Post by Shadow »

You might be right.
But I replaced both tranny and motor seals.

Sometimes it would slip on the freeway when I put it in 4th at low rpm and just floor it. Only made 420tq at 19psi before the injectors cut out at 5.5k.
Top
turbodan
Posts: 9217
Joined: Jan 09, 2007 10:19 PM

Post by turbodan »

Did you put it in with a new flywheel?
Top
Shadow
Posts: 951
Joined: Dec 28, 2008 10:03 PM
Location: USA

Post by Shadow »

Resurfaced with the same step up.
It's starting to grab alittle better now after some easy miles.
Top
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:
Contact DieselBoost

Post by DieselBoost »

Clutch setup 240mm sachs racing "m5" with stock plate

my friend uses 228mm sachs racing "m3" with stock plate

quite cheap stiff setup...

no problems yet with our diesels
Top
Post Reply

Return to “Forced Induction”