Page 2 of 11

Re: Blade Fuse Retrofit Kits

Posted: Apr 09, 2021 3:48 PM
by blackmamba
Sorry I forgot to mention, these look amazing!!! Great work!

Re: Blade Fuse Retrofit Kits

Posted: Apr 09, 2021 5:23 PM
by beast02er
I am interested in one. You should hit up BluntTech and see if you can get him to sell for you as well, increase the volume!

-Bryan

Re: Blade Fuse Retrofit Kits

Posted: Apr 09, 2021 5:53 PM
by RonW
RonW wrote: Apr 09, 2021 10:57 AMI'm interested, but I have questions about the LEDs:
-Do they stay on for unswitched 12V fuses even when the car is off?
-Are they on only when their fuses are intact, only when blown, or a different color when intact than when blown?
Galahad wrote: Apr 09, 2021 11:49 AMThere's a master switch for the LEDs between the spares and fuse 4 so you can turn them off when you're not using them.
Each LED only turns on when the associated fuse has power - green when the fuse is good and red when it's blown.
I'm going to take a wild guess and say that if the fuse blows and has no load on it, the LED shows yellow instead of red.
And yes, I'd like one (depending on the price).

Re: Blade Fuse Retrofit Kits

Posted: Apr 09, 2021 6:13 PM
by Galahad
RonW wrote: Apr 09, 2021 5:53 PM I'm going to take a wild guess and say that if the fuse blows and has no load on it, the LED shows yellow instead of red.
The LEDs can be either green (good fuse), red (blown fuse), or off (unpowered fuse) - there's no load detection in the fuse status circuitry.

Re: Blade Fuse Retrofit Kits

Posted: Apr 10, 2021 1:48 AM
by lizard
I am interested in purchasing one or maybe two.

Re: Blade Fuse Retrofit Kits

Posted: Apr 10, 2021 9:39 AM
by AdamC
I'm keen too, plz. Assuming you'll ship internationally?

Re: Blade Fuse Retrofit Kits

Posted: Apr 10, 2021 9:40 AM
by kaiO
Definitely interested. Count me in for one.

Re: Blade Fuse Retrofit Kits

Posted: Apr 10, 2021 2:55 PM
by Ken H.
Galahad:
Noted that I've signed up for one of these.
Question: are there any wiring or circuit layout differences between what you and cek have laid out and the fusebox/wiring for the S38 M5?
Since The Plan is to install this in Lucifer's Hammer, if there are differences, is there any way you can identify/list what those might be?

The more information we have up front, the less likely something will get honked up . . . ;)
Based on what's in the thread, this looks like The Hot Setup.

Cheers,
Ken H.

Re: Blade Fuse Retrofit Kits

Posted: Apr 10, 2021 4:56 PM
by 1st 5er
beast02er wrote: Apr 09, 2021 5:23 PM I am interested in one. You should hit up BluntTech and see if you can get him to sell for you as well, increase the volume!

-Bryan


Or Angry Ass. https://angry-ass.com/

Re: Blade Fuse Retrofit Kits

Posted: Apr 11, 2021 1:37 AM
by carlb
Ill take two as soon as you can get ready. Seriously, this is awesome!

Re: Blade Fuse Retrofit Kits

Posted: Apr 14, 2021 4:40 PM
by Zeuropa
I'm in.
Coming soon FS: all the lame bullet fuses I've been plucking out of Mercedes in local junk yards...

Re: Blade Fuse Retrofit Kits

Posted: Apr 14, 2021 5:56 PM
by thrty8street
I will take two when they are ready.

Re: Blade Fuse Retrofit Kits

Posted: Apr 14, 2021 11:37 PM
by milarsky
Please mark me down for one, possibly two. Awesome work!

Re: Blade Fuse Retrofit Kits

Posted: Apr 15, 2021 5:11 PM
by Galahad
Hi everybody,
I've been working through my punch list of changes for the production version. I've got many of the big ones done, but I'm waiting on some different part options to ship in before I can finish up.
AdamC wrote: Apr 10, 2021 9:39 AM I'm keen too, plz. Assuming you'll ship internationally?
I've never done that before but I'm certainly willing to try.
Ken H. wrote: Apr 10, 2021 2:55 PM Question: are there any wiring or circuit layout differences between what you and cek have laid out and the fusebox/wiring for the S38 M5 [and] is there any way you can identify/list what those might be?
The only known difference between any e28 fuse boxes is that US cars have a shared power supply for fuses 7 and 8 and euro cars do not; my design can do either. See this thread for more details.
In any event the instructions will include a list of all known potential differences to avoid headaches during / after installation.
Edit: As another data point, my friend's Canadian M5 has the standard US fuse box based on the photo he sent me.
Ken H. wrote: Apr 10, 2021 2:55 PM Based on what's in the thread, this looks like The Hot Setup.
Thank you!
Zeuropa wrote: Apr 14, 2021 4:40 PM Coming soon FS: all the lame bullet fuses I've been plucking out of Mercedes in local junk yards...
I have a box full of those stupid things and I haven't even converted all my cars yet - my life's work may be singlehandedly crashing the market for used bullet fuses.

-Galahad

Re: Blade Fuse Retrofit Kits

Posted: Apr 25, 2021 7:44 AM
by Jasco1
This solution looks incredible! Please put me down for 1.

Re: Blade Fuse Retrofit Kits

Posted: Apr 26, 2021 11:55 PM
by carlb
Take mah money!!!!

Re: Blade Fuse Retrofit Kits

Posted: Apr 27, 2021 2:02 AM
by fries_man
I would be interested in at least 3 of these.
Awesome job!

-Jordan

Re: Blade Fuse Retrofit Kits

Posted: May 08, 2021 10:32 PM
by Galahad
Hi all,
The product design has been finalized - I'm waiting on the first batch of pre-production units to check over but I'm not anticipating any problems.

I've formed a company so I can more easily sell these (and future projects). Go ahead and bookmark HolyGrailLabs.com, that's where everything will be available once I'm ready to start taking orders.

I know the question of the hour is "How much will these cost?" but you're all going to have to hold tight a bit longer on that one.

-Galahad

Re: Blade Fuse Retrofit Kits

Posted: May 09, 2021 6:43 PM
by carlb
Galahad wrote: May 08, 2021 10:32 PM Go ahead and bookmark HolyGrailLabs.com, that's where everything will be available once I'm ready to start taking orders.
Done.

Re: Blade Fuse Retrofit Kits

Posted: May 13, 2021 2:06 PM
by Mr.3-5-7
Oh dear lord these will be a godsend. I dont know if it matters but mark me down for one as well.

Re: Blade Fuse Retrofit Kits

Posted: May 15, 2021 11:43 PM
by 1st 5er
:wave:

Re: Blade Fuse Retrofit Kits

Posted: May 20, 2021 10:28 AM
by Badger
In for one, maybe 2.

Re: Blade Fuse Retrofit Kits

Posted: May 23, 2021 6:13 PM
by sQuirly
Definitely need one of these the last e28 would wiggle out fuse's as I'd drive

Re: Blade Fuse Retrofit Kits

Posted: May 23, 2021 9:24 PM
by mynameistaken
I’ll take one, too.

Re: Blade Fuse Retrofit Kits

Posted: Jun 08, 2021 12:21 PM
by Galahad
I've gotten this question a couple times so I thought I'd clarify: the website says "sold out" at the moment as a placeholder, preorders haven't actually started yet. I'll post here when preorders go live.

As a status update: the manufacturer ran into some issues (the part is quite difficult to assemble) but it looks like these have been resolved, I should have the sample units in about a week. We're getting close!

Re: Blade Fuse Retrofit Kits

Posted: Jun 27, 2021 8:49 AM
by Bonsaibacker
Visited the website- looks like this is happening soon!!!

Re: Blade Fuse Retrofit Kits

Posted: Jun 27, 2021 11:35 AM
by MyE24
E24?

Re: Blade Fuse Retrofit Kits

Posted: Jun 27, 2021 12:56 PM
by Glenn in encinitas
In for one- and if it is as advertised, at least two more.

Re: Blade Fuse Retrofit Kits

Posted: Jun 28, 2021 3:12 PM
by andrewlewis1114
Hi everyone!

Yikes I wish I had seen this earlier, I have my 1987 e28 535is in the shop now for electrical check-ups (possible rodent damage), I would have totally ordered one of these! would have been perfect timing

Anyone know if there is a chance it may become available again in the near future? (the website says its sold out)

--Andrew

Re: Blade Fuse Retrofit Kits

Posted: Jun 28, 2021 3:37 PM
by Ibmotoren
andrewlewis1114 wrote: Jun 28, 2021 3:12 PM Hi everyone!

Yikes I wish I had seen this earlier, I have my 1987 e28 535is in the shop now for electrical check-ups (possible rodent damage), I would have totally ordered one of these! would have been perfect timing

Anyone know if there is a chance it may become available again in the near future? (the website says its sold out)

--Andrew
They haven’t sold any yet. See post from Galahad, 4 posts above yours. They’re still in the works.