MyE28.com DEV

I have a summit racing oil pressure gauge and I have been running into difficulties trying to source an adapter that will allow me to connect the aftermarket AND dummy sensors. I was told by the summit worker than I could attach the aftermarket gauge to the stock sensor and I'll be jig fine

You might ping mooseheadm5 or possibly here:
https://bimmerheads.com/collections/m20 ... re-adapter

Nebraska_e28 wrote:You might ping mooseheadm5 or possibly here:
https://bimmerheads.com/collections/m20 ... re-adapter

Exactly what I need!! Thanks a million for the insight dude!!!

5timesturbo wrote:

Nebraska_e28 wrote:You might ping mooseheadm5 or possibly here:
https://bimmerheads.com/collections/m20 ... re-adapter

Exactly what I need!! Thanks a million for the insight dude!!!

Happy to help.

Nebraska_e28 wrote:You might ping mooseheadm5 or possibly here:
https://bimmerheads.com/collections/m20 ... re-adapter

This is what I run. Its a tight fit in the e24 near the firewall but it fits.