Page 1 of 1
Took Al to the dyno yesterday '84-533i
Posted: May 13, 2019 6:35 PM
by bbaxter
Spent six hours on the dyno yesterday. That went over really well on Mothers Day!! Wired the wide-band and programmed the Mega Squirt. Just took Michelle for a ride. The cam's and the boost both kick in about the same time. Michelle's comment was" Oh wow, I can feel that !" Pulled 376/305. I'm happy with that. Feels really strong and smooth. bbaxter
Re: Took Al to the dyno yesterday '84-533i
Posted: May 13, 2019 7:31 PM
by marc79euro645
congrats!
whats your setup?
Re: Took Al to the dyno yesterday '84-533i
Posted: May 13, 2019 7:46 PM
by bbaxter
Just rebuilt the S50 that's been in the car for the past 11 years. Forged internals, 264/270 cams, AA supercharger (12 psi), mega-squirt computer. I did splurge on a CAE shifter. A miss shift would just ruin my day. bbaxter
Re: Took Al to the dyno yesterday '84-533i
Posted: May 14, 2019 8:56 AM
by Shawn D.
Nice!
Re: Took Al to the dyno yesterday '84-533i
Posted: May 14, 2019 12:14 PM
by Shadow
nice. post up that curve.
Re: Took Al to the dyno yesterday '84-533i
Posted: May 14, 2019 4:48 PM
by T_C_D
Seems like a nice driving and manageable setup.
Re: Took Al to the dyno yesterday '84-533i
Posted: May 14, 2019 8:26 PM
by FirstFives Dictator
https://www.dropbox.com/s/yf79zrn0xw2x1io/run8.jpeg
I think there is more to do but pretty happy with the setup.
Really liked having the AEM Uego X gauge connected via CANBus; no more grounding errors.
Re: Took Al to the dyno yesterday '84-533i
Posted: May 14, 2019 11:18 PM
by Shadow
beautiful curve it just pulls and pulls.
probably will last forever at that power.
Re: Took Al to the dyno yesterday '84-533i
Posted: May 15, 2019 7:59 AM
by Shawn D.
Dang, that's a nice, flat torque curve!
