MyE28.com DEV

What is everybody doing with the fuel line that goes to the charcoal canister then to the intake manifold.

I was thinking putting a 1 way check valve in the line and route it to intake manifold so it's sucking vapors pretty much all the time.

Can MS control an evap purge solenoid easily? MS2

Plugged at manifold, tank open to atmosphere

MS can control evap solenoids etc but it's such a pain

jim325 wrote:What is everybody doing with the fuel line that goes to the charcoal canister then to the intake manifold.

I was thinking putting a 1 way check valve in the line and route it to intake manifold so it's sucking vapors pretty much all the time.

Can MS control an evap purge solenoid easily? MS2

Yours is wired to control it; I can help you with the settings.
Or you can use that output for boost control.